How To Clean Roller Brush On Shark Vacuum

So, you have decided to finally carry out the maintenance process of the Shark vacuum cleaner? You have made the right choice because without maintaining the cleaner, it will have a short lifespan. It can even start offering lower overall performance at some point if you do not maintain it.

Well, when it comes to maintaining the device, it might seem hard at the beginning. But once you know how to remove roller brush from shark vacuum, things will get pretty easier. And we know exactly how to take it out easily, which is what we are going to share in this article. So, continue reading!

When Do You Need to Maintain the Roller Brush of Shark Vacuum?

Before we get into the process of taking the roller brush out of the Shark Vacuum, let us let you know when you should take it out. First of all, while carrying out the maintenance task, you would have to take it out. Without taking it out, you would not be able to clean the machine out properly.

Maintain the Roller Brush of Shark Vacuum

Now, the question arises, when should you maintain it, right? After using it for a long time, you will notice that there are too much hair and other strands wrapped around the brush. And it might get to a stage where it might render useless. Yes, the roller brush might finally stop rolling.

When that happens, it will no longer be able to pick up and clean the debris off the surface. And you can covert it from that stage to something that is useful and fully functional again by carrying out the maintenance. Well, that is what we are going to describe in the next step.

How to Take Out Roller Brush from Shark Vacuum?

Even if the roller brush does not render useless, you might want to take it out and clean it if you see too much hair and debris clogged on it. And for removing it, you would have to follow these steps:

Remove Roller Brush from Shark Vacuum

Step 1: Turn the Machine Off

It goes without saying that you would have to make sure that the power cord is out of the power outlet before you move into other steps. Now, many of the users will argue that if you turn the machine off using the power switch, what is the point of taking the power cord out?

Roller Brush of Shark Vacuum

Taking the power cord out will act like an additional safety step that will make sure nothing goes wrong while you are taking off the parts. If the machine starts operating while you are taking parts off, you can end up with injuries. Also, the parts can get damaged, and the whole machine can become non-functional.

And you would not want to injure yourself, nor do you want to damage the machine, right? For that reason, it is quite important to get the power cord out of the power outlet before handling the parts.

Step 2: Access the Roller Brush

After the power cord is taken care of, look at the roller brush on the Shark vacuum. It should be on the underside of the cleaner. And it would be easier to carry out the steps if you lay it down. That will expose the underside and make it easier for you to find the screws and plates that require removing.

Additionally, in this position, turning the machine around will be easier as well. Sometimes, the screws on the bottom can get extensively corroded, and you might have to apply a bit more pressure on them to get them out. And guess what? It will be easier to take them out if you place the device down!

Access the Roller Brush

However, if you do notice any rust on the screws, we recommend using a rust remover before moving on to the next steps. That will provide you easy access to the inside, and removing them will also become an easy task.

Step 3: Take out the Screws

Once you have placed the device in the right position, you would need to unscrew the screws. First, check the screw and select a screwdriver that has the right head. For most of the models, you will find a screwdriver inside the packaging. But, if your one does not come with one, you might have to get one separately.

Do make sure that you have a small container in your working space. That will enable you to keep the unscrewed screws in a secure place, and there will no need to worry about losing them. Nevertheless, there will be around four to five screws on the bottom. Use the screwdriver to unscrew them.

Take out the Screws

Place the screws inside the container and then move to the next step. Also, do not use a screwdriver that does not have a matching head because that might strip the heads of the screws.

Step 4: Pop the Faceplate and Remove the Brush

Now that all of the screws are taken care of, pop the faceplate out. Do not use too much force to detach the faceplate because you will risk breaking it. And replacement faceplate is not that easy to find.

After taking out the faceplate, start working on the brush. Usually, the brush should slide right out of the slot. But only one of the sides will slide out in that case. You would have to pull on that side to get the other side out.

Remove the Brush

However, if the other side does not come out easily, rotate the machine around and work on the other end. Again, do not use too much force or try to remove the brush in a hurry. That will only damage the belt. The brush should come out with a little bit of pull.

Final Words

At this point, we hope that you know that learning how to remove roller brush from shark vacuum is not actually learning rocket science. All you need to do is follow the steps properly and take it out with a gentle pull, and you should be all good!